|Maximum Sheet Size:||540×740mm||Minimum Sheet Size:||273×393mm|
|Sheet Thickness:||0.06-0.6mm||Maximum Image Area:||528×730mm|
|Plate Size:||677×755×0.3mm||Blanket Size:||740×760×1.9mm|
|Maximum Feeder Pile Height:||940mm||Maximum Deivery Pile Height:||780mm|
|Machine Overall Dimensions:||7380×2550×1950mm||Total Power Of Motors:||23kw|
12000sph Offset Printing Equipment,
0.06mm Sheet Offset Printing Equipment,
Alcoholic Damping Offset Printing Machine
It is equipped with CC-LINK technological bus module from Mitsubishi.
Double-diameter impression cylinder and transfer drum can reduce the times of sheet take-over between print units.
The plate cylinder can be adjusted in the circumferential direction, lateral direction and diagonal direction.
|1 .The semi APC (Automatic Plate Changer) shortens the make-ready time.
2. To preset paper thickness when printing different kinds of paper. To adjust printing pressure in every unit automatically, quickly and synchronously.
3. With non-stop feeder, piles are changed at production speed. It saves a great deal of time when running thick paper and long version work offline.
4. It is equipped with CC-LINK technological bus module from Mitsubishi.
5. Double-diameter impression cylinder and transfer drum can reduce the times of sheet take-over between print units.
6. The plate cylinder can be adjusted in the circumferential direction, lateral direction and diagonal direction.
7. There are five rollers on the plate cylinder. There is an intermediate roller in alcoholic damping system, which can eliminate the ,lghost" image, achieve the quick ink-water balance and reduce paper consumption.
8. There are 23 zones in split (staggered) ductor.
-Conjugated cam. Forwarding mechanism controlled by linear guide rail makes machine speed faster and more stable.
-Rotary valve with patent can clean paper dust automatically and reduce the fault.
- Both of frame and base are integral casting.
-High frequency quenching of gears guarantee transmission accuracy.
- Helical gears, high overlap coefficient and low noise.
-The surface on the impression cylinders and plate cylinders are sprayed stainless steel so as to prolong press life better.
-Dynamic balance design can reduce vibration during printing.
-The press memory or job memory card (disk) can save the current job. Changes and settings made to the current job are transferred to the press. While in printing mode, you can enter the presetting values for next job into the press memory or stored to a disk.
Ink Amount Control Console:
-Every ink key in every unit can be set by console.
-Ink amount can be displayed in digital and can be saved.
Pneumatic Clamp Bar,
Change Plate Without Tools:
-Tension of clamp bar is controlled by imported hoses and disc springs, so that it is more flexible for operation.
-Corners of cylinders are controlled by high precision encoder. Plates will be installed and dismounted by program automatically. Thus it can meet the long version and short version edition of the printing business needs.
-The tail of clamp bar is separated, so that it can help paper more smooth.
-After checkered high strength steel pads had been quenched, their life will be longer and replacement will be more conveniently.
-Wear-resistant soft pads ensure stability of paper handover and precision of paper transmission.
-High precision needle roller bearings and opening bearings improve stability of gripper system.
Automatic Device For Adjusting Paper Thickness:
-It is equipped with gear driven. Distance between cylinders can be given some feedbacks to screen by potentiometer automatically.
-Permanent magnetic generator driven can ensure stability of printing pressure, because of large torsion and strong self-lock.
-It is easier and more convenient to input paper thickness on the screen directly.
Vacuum Suction Feeder Table:
- Imported air pump with large volume
-It is suitable for all paper in any types or size automatically, so as to change paper format more quickly and more easily.
-Ultrasonic double-sheet detector can protect cylinders better.