|Place of Origin:||China|
|Model Number:||QZYW-ET Series|
|Minimum Order Quantity:||1 Set/Sets|
|Packaging Details:||Packed in carton firstly,and then reinforced with wooden case for outer packing|
|Delivery Time:||30 working days after received your payment|
|Payment Terms:||T/T or western Union|
|Supply Ability:||30 sets per month|
|Cutting Width:||78cm||Cutting Speed:||45 R/min|
automatic paper cutter,
paper cutting equipment
Paper Sheet Cutting Machine , a4 Paper Cutting Machine Automatic
|Max.cutting height without assistance pressing plate||CM||13||13||16.5||13|
|Min cutting depth without assistance pressing plate||CM||2.5||2.5||3||3|
|Extended length of working table||CM||64||65||73||73|
|Height of working table||CM||86||86||89||86|
|Machine width including side working table||CM||215||233||266||266|
|Total length of working table||CM||178||198||226||241|
|Manx. Paper pressure||N||30000||35000||40000||40000|
|Power of main motor||KW||3||3||4||4|
|Motor for paper feeding||KW||0.75||0.75||0.75||0.75|
|Max.cutting height without assistance pressing plate||CM||16.5||16.5||16.5||16.5|
|Min cutting depth without assistance pressing plate||CM||3||3||3||3|
|Extended length of working table||CM||74||75||75||75|
|Height of working table||CM||91||90||90||90|
|Machine width including side working table||CM||287||314||322||375|
|Total length of working table||CM||259||280||283||355|
|Manx. Paper pressure||N||45000||55000||60000||65000|
|Power of main motor||KW||4||5.5||5.5||7.5|
|Motor for paper feeding||KW||1||1||1||1|
Paul new high-speed cutter, the wait is expected figures in Japan to exchange control system, 10.4-inch color LCD display. Data resolution of 0.01mm, and fault diagnosis capabilities of self-functioning model shows that 100 program group, more than 10,000 cut at different positions, dynamic display of cutting and running, dynamic tracking, the maximum speed of pushing paper 5-18 m / min, a more powerful computer operating system may be memory, storage, memory storage time of up to 300,000 hours above, and self-maintenance of the operating system. Italy selected hydraulic components, Germany, Japan, Korea Electric components, Taiwan ball screw, linear rail, and fitted with safety overload cut switch, safety lock pressure paper container, electrical configuration for the programmable logic controller PLC to all electrical, mechanical implementation of monitoring, the use of imported low-maintenance bearings.
A. Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter.
B. The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof.Large side workingtable(1000*800) is optional.
C. IR photoelectric protection,buttons by two hands safety devices.
D. Safety device for knife bed, overloading protection for cutting,automatic return safety device.
E. Imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The paper is pressed twice by pressure-increased system.
F. Mechanical assistance device for knife replacement makes knife replaced quickly and safely.
G. Equipped with the optical knife alignment to make cutting more convenient.
H. PLC control system.
I. Ejecting device for knife bar.
J. Flat worm speed reducer transmission.
K. Inside electronic knife locker to make the cutting more safety and stable.
L. Multination langueage operation interface.
M. Carry on the block programming operation through the figures and diagrams operation manual.
N. Safety device for overloading cutting.
O. Safety locker of press bar.