Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min

Basic Information
Place of Origin: China
Brand Name: PRINTYOUNG
Certification: CE
Model Number: ZH-450H
Minimum Order Quantity: 1 Set
Packaging Details: Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. A full set of maintenance and operation manuals is included.
Delivery Time: 45 days
Payment Terms: L/C, T/T
Supply Ability: 20 Set/Sets per Month
Maximum Linear Velocity: 220m/min Paper: 210~600 Gsm Cardboard And E Flute Corrugated Paper Board
Basic Form Of Paste Box: Glue Drying Feed Mode: Automatic Continuous Feed
Use Of Adhesives: Water Base Oil Electricity Requirements: AC 3Phase 50Hz 380V,12KW
Weight: Approximately 1 Ton Size: 6000×3500×1500mm
Counting Range: 0~999999(automatic Counting)
High Light:

Paper Cup Sleeve Automatic Folder Gluer

,

Automatic Folder Gluer 220m/Min

,

Box Pasting Automatic Folder Gluer

Products Description
ZH-450H Paper Cup Sleeve Gluing Drying Machine
 

Features

The whole machine design is reasonable, the failure rate is low, the electricity consumption is low; Speed adjustment completed once, the equipment before and after the transmission all synchronous, easy to operate; Electrical control advanced, before and after the equipment can control the operation of the paper. When feeding paper, start counting with infrared photoelectric counter. Running time can be arbitrarily controlled before and after the two batches between the interval, the operation is extremely convenient; Fast, medium carton can produce 10~30 thousand per hour.
Technical Parameters
ZH-450H Paper Cup Sleeve Gluing Drying Machine
Maximum linear velocity
220 m/min
Paper
210~600 gsm cardboard and E flute corrugated paper board
Basic form of paste box
glue drying
Feed mode
automatic continuous feed
Use of adhesives
water base oil
Electricity requirements
AC 3Phase 50Hz 380V,12KW
Weight
approximately 1 Ton
Size
6000×3500×1500mm
Counting range
0~999999(automatic counting)
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 0
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 1

 

 
Configuration
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 2
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 3

Paper Feed

The debugging of the feed part is the basis of the paste box, and its quality plays a very important role in the whole paste box process. Therefore, special attention should be paid to the debugging. The feed part is composed of five feed belts, rollers, two top paper cutters, two stainless steel plates and a photoelectric counting sensor, etc. The tightness of the belt is adjusted by the two ends of the front roller. There are two ways to move the belt: the first is to loosen the adjusting screws on the two ends of the tensioning bearing, and then loosen the plate screws on the shift slot wheel so that the belt can be moved at will. There are four requirements for the position of the two paper cutters. One is that the top is on the top of the belt (that is, there is a roller under the belt); the other is that the closer the folding line is, the better the paper is. The gap between the lower end of the cutter and the belt is based on the thickness of a piece of paper. The driving force of the paper is the friction between the belt and the bottom layer of paper, so the contact surface between the carton and the belt is very important. The tail can be raised when the box is large, and the tail can be put down when the box is small. The feed part is also equipped with a vibrator, the user can choose to use the vibrator or not vibrator. There are two phototubes on the sensor, so that it can be aligned on this side of the paste.
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 4
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 5

Correction Section & Upper Glue

The correction section can align the carton to the left with the baffle as the plane, making the glue and paper transmission more stable.The paper feed is continuous one by one. The paper comes in from the feed to the glue (picture 4). Before you go to the glue,adjust the position of the left and right moving row. The belt on the glue and the belt on the paper are not the same speed, the glue is fast and the paper is slow. When the paper enters the glue part, the other side enters the glue part first, and the paper is inclined by the pull force, so the two rows of small wheels above the rubber belt should be adjusted to move back and forth so that both sides enter the paper at the same time and are not slanted. After the box is debugged accurately, the glue wheel is adjusted to the appropriate position on the paste mouth, so that the glue is completely glued to the paste mouth and parallel to the side of the box, and the amount of glue is adjusted by the scraper at the bottom of the glue box.
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 6
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 7
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 8

Counter & Conveyor

The main body of the conveying department is mainly composed of a wide grid belt and a row of fans, heating pipes and counters,so that the good glue box after heating and drying, sent to the back-collection department, so that the carton is basically affixed, can be packed out of the factory. The temperature can be controlled by a temperature control box.
Customer
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 9
Company Profile
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 10
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 11
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 12
Why Choose Us
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 13
Product packaging
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 14
Box Pasting Paper Cup Sleeve Automatic Folder Gluer 220m/Min 15
FAQ
Q1: Are you a manufacturer or a trading company?
A: Our shanghai office is mainly doing export. We have our own factory in Wenzhou, Zhejiang Province.
Q2. What is the machine warranty?
A: One year. After the warranty, we still provide technical support to buyer at low cost.
Q3. What is the production time while placing order?
A: Normally about 10-20 days.
Q4. What is the delivery time?
A: 15-30days after deposit.
Q5. Can your company handle shipping for customers?
A: Yes, just give us destination sea port or container yard.
Q6. Does the packing strong?
A: Yes. Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. A full set of maintenance and operation manuals is included..
Q7. How about the machine installation and training ?
A: 1)We provide training in our factory for free
2)We can send technicians (engineers) to your factory for installation and training. You shall pay the round trip air fare and accommodations, plus each technician charges USD100/per day.
Q8. Do you have machines in stock?
A: For standard model, we have a large quantity in stock. For special model, we need 20-30 days to produce it for you.
Q9. How can you assure the machines’ quality?
A: Each machine will be test running at least 24 hours before delivery to assure the quality. And during the warranty, we will
give spare parts for free if machine has any problem.
Q10. Do you inspect machines or test running before packing?
A: Of course we do. We have QC department to debug the machine before packing. If you want to use specific material to do the test running, you need to pay for the cost of the material.
Q11. What’s the payment term?
A: T/T 30% in advance, the balance shall be paid before delivery. We also accept payment by West Union or L/C at sight.
Q12. Do you accept factory visiting?
A: Warmly welcome for your visiting.
Q13. How many years are you in printing field?
A: Shanghai company is 12 years old, the factory is more than 20years.
Q14. How many clients do you have?
A: We have sold our machines to about 60 countries. We have agents in South Africa, Morocco and Italy.

Contact Details
Ms Caren

Phone Number : +8613818020601

WhatsApp : +008618017382810